Quantcast
Channel: Resodyn Acoustic Mixers
Viewing all 122 articles
Browse latest View live
↧

Resodyn Acoustic Mixer featured at Eurosatory 2016

May 13, 2016, 9:43 am
$
0
0

Resodyn will be featured at Eurosatory as part of the world’s largest international land and air-land defense and security exhibition held June 13-17 in Paris, France. Resodyn Acoustic Mixers will exhibit in Hall 6, Stand No. E-773 at the show.

Resodyn manufactured products serve customers in 24 countries around the globe. Mr. Marc Augustin, Managing Director of Resodyn Europe SARL of Bordeaux, France, will provide information and demonstrations in the booth.

For more information, refer to the press release attached below.
Resodyn Eurosatory Release Information

↧
Search

LabRAM in Excipient Issue of Tablets and Capsules Magazine

July 22, 2009, 3:24 pm
$
0
0

Tablets and Capsules Magazine, dedicated to pharmaceutical tablet technology, has featured the LabRAM in its Mixers and Blenders survey in the July issue on excipients.  The LabRAM uniformly blends pharmaceutical excipients and APIs in a matter of seconds.  Powder mixing in the LabRAM occurs without the use of impellers or mixing blades and can be performed in disposable containers, virtually eliminating contamination and clean-up.

↧
↧

Resodyn Acoustic Mixers, Inc., introduces the RAM5 Mixer

March 10, 2008, 9:35 am
$
0
0

Butte, MT, March 10, 2008

Today Resodyn™ Acoustic Mixers, Inc., announced the commercial availability of the RAM5, a production scale mixer based on the company’s proprietary ResonantAcoustic® Mixing technology. This revolutionary mixing technology uses low-frequency, high-intensity acoustic energy to produce a consistent shear field throughout the mixing vessel causing rapid fluidization and dispersion of material.  It offers processors improved product quality and increased production efficiency.

The RAM5 mixes without impellers and is capable of mixing one pound (500 grams) to 80 pounds (35 kg) of material. Various combinations of gases, liquids, solids, powders, viscous liquids and pastes are thoroughly and consistently mixed with this innovative technology. The RAM5 is the only noninvasive mixer capable of mixing over 10 kg of materials with viscosities beyond 100 million cP. Because the RAM5 is a non-invasive mixer, mixing can be done in sealed vessels of varying sizes and design. The RAM5 can accommodate disposable or end-use vessels such as 6 gallon steel drums. The RAM5  generates a fluidized system with small vortices that homogenize materials much faster and with less heat generation than occurs in impeller systems, where heat and mixing are localized around the impeller. The RAM5’s unique mixing mechanics coupled with flexibility in the design of the mixing vessel, allows the reformulation of products around new manufacturing processes.

Additional information about the RAM5 mixer and ResonantAcoustic® Mixing technology may be obtained from Resodyn™ Acoustic Mixers, Inc., by calling 406-497-5333, by emailing info@resodynmixers.com, or by visiting www.resodynmixers.com

ResonantAcoustic® is a registered trademark of the Resodyn Corporation.

About Resodyn™ Acoustic Mixers, Inc.

Resodyn™ Acoustic Mixers, Inc., located in Butte, Montana, is the premier supplier of ResonantAcoustic® mixers to laboratories, universities and industries around the world. The company designs, manufactures and markets advanced mixing systems using low-frequency, high intensity acoustic technology patented by the Resodyn Corporation. www.resodynmixers.com

↧

Last Call for Registering for Resodyn’s 7th Annual Technical InterChange

August 23, 2017, 8:26 am
$
0
0

Resodyn’s 7th Annual Technical InterChange (TI 17) registration will close at Midnight, September 1, 2017. TI 17 is dedicated to the discovery and exploration of ResonantAcoustic Mixing (RAM) theory, practice, and hands-on use of all scales of RAM equipment.

The 2017 event will be held on September 19th – 21st at Butte’s newest hotel and convention venue, the Copper King Hotel and Convention Center by Clarion. An opening reception will be held on the evening of September 18, while RAM 5 Certification and ad hoc meetings extend into September 22.

Resodyn’s Technical InterChange attracts experts, new users, and explorers from around the world and across various industries. This three-day event includes technical and user presentations, hands-on demonstrations, open poster sessions, and other opportunities to gain first-hand knowledge about how RAM™ will change the way you think about mixing and processing. Resodyn provides all materials, meals, transportation, and social events. Please click here to register for the 7th Annual Technical InterChange, or call 406-497-5333.

 

 

↧

New OmniRAM Mixer Introduced

August 23, 2017, 9:29 am
$
0
0

Resodyn Acoustic Mixers Continues to Change How You Think About Mixing and Processing

August 23, 2017, BUTTE, MT- Resodyn Acoustic Mixers announces the release of their new pilot and production scale mixer, the OmniRAM™. This new addition to the ResonantAcoustic® Mixing (RAM) product line is designed to provide world-class RAM mixing performance while also bridging the gap between Resodyn’s LabRAM™ ll – 1 kg capacity system and the RAM™ 5 – 36 kg system. OmniRAM™ can process materials faster, better, more efficiently, and more productively with a payload capacity of up to 5 kilograms/ 11 pounds.

Since 2007, customers have trusted the core RAM technology for mixing of powders, liquids, gases, and viscous materials at higher quality and lower cost than many traditional mixing technologies. ResonantAcoustic® Mixing is a non-contact mixing system that employs low-frequency acoustic mixing at intensities up to 100g’s of acceleration without the inherent issues associated with the use of conventional, contact based mixing technologies.

The New OmniRAM™ Features Include:

  • Increased Capacity: Max capacity of 5 kilograms/11 pounds provides the flexibility to process at a test or pilot scale, as well as production levels.
  • Mixer Versatility: RAM’s universal vessel holder allows for multiple mixing vessel types. Vacuum and jacketed accessories are also available to increase processing capabilities, eliminating cross-contamination and clean-up while processing virtually any type of material.
  • Increased Security Features: RAM onboard operating system provides machine operations control, recipe development and storage, as well as multiple level, digital security and access control from operator to supervisor.

Other Optional Features:

  • Vacuum System: Separate manual or OmniRAM™ controlled automatic vacuum systems provide degassing and improved processing functions
  • Jacketed Vessel: Allows for mixing vessel temperatures from 302oF / 150oC to 34oF/1.1oC
  • Temperature Monitoring: On-board tracking of internal temperature of mixing vessel
  • Continuous Processing: the innovative Continuous Acoustic Mixing (CAM) feature breaks through the batch-based throughput barrier with non-stop powder and solids processing at the highest dispersion and uniformity levels

Hazardous and Energetic Applications

OmniRAM™ can also be configured for optional certification in Class l Div l and Div ll, Groups C – G environments, providing a specially designed and manufactured platform for hazardous and energetic materials processing.

For More Information and Product Specifics, please click here for Product Sheet Download: OmniRAM™ Product Sheet

↧
↧

Resodyn’s 7th Annual Technical InterChange Attracts Attendees from Around the World

September 29, 2017, 3:33 pm
$
0
0

 

September 29, 2017, BUTTE, MT- On September 19th – 21st, Resodyn Acoustic Mixers’ 7th Annual Technical InterChange (TI 17) attracted 64 attendees from 8 different countries to the Butte, MT. Copper King Hotel and Convention Center was the venue for this event which is dedicated to the discovery and exploration of ResonantAcoustic Mixing (RAM) theory, practice, and hands-on use of all scales of RAM equipment.

Experts, new users, and explorers from a variety of industries including energetics, chemicals, and pharmaceuticals came together for this one of a kind event to learn about new RAM innovations and practices as well as to collaborate and share their own discoveries using Resonant Mixing in their own facilities.

Attendees learned more about the technology through technical and user presentations from Resodyn staff as well as from external users from around the world. In the coming weeks, Resodyn will be showcasing these external industry users and their informative presentations. Follow us on LinkedIn, Twitter, and Facebook for more updates about how RAM is changing the way you think about mixing and processing.

↧

Resodyn Acoustic Mixers Announces Updated YouTube Channel

October 6, 2017, 2:37 pm
↧

Resodyn Champions RAM AT IPS 2018

July 17, 2018, 12:10 pm
$
0
0

Image result for IPS pyrotechnics

Resodyn representatives Lawrence C. Farrar, President and C.E.O. and Mike Miller, Senior Chemical Engineer joined experts and developers at the 43rd International Pyrotechnics Seminar in Fort Collins, Colorado. Taking place July 8-13, 2018, the Seminar explores technology and applications issues relating to energetic and pyrotechnic technology. For more information call 406-497-5333 or email us at info@resodynmixers.com

IPS Seminar Series
2018 IPS Group Photo
↧
Search

LabRAM II H Released for Hazardous Environments

May 9, 2014, 4:58 pm
$
0
0

BUTTE, MT – Resodyn Acoustic Mixers announced the release of their hazardous environment, developmental mixer, the LabRAM™ II H. The second generation application of ResonantAcoustic® Mixing (RAM) technology introduces significant benefits to commercial and defense industry customers who rely on the core RAM technology for high quality and low cost mixing of hazardous materials.

Since its introduction to the energetics marketplace in 2007, RAM mixers have become the processing technology of choice at many government and commercial facilities. The technology allows users to employ intense, low-frequency acoustic mixing at up to 100g’s of acceleration without the several inherent issues associated with the use of conventional mixing technologies.

“LabRAM II H inherently changes the way a user thinks about processing and mixing,” according to Resodyn President and CEO, Lawrence Farrar. “The innovative performance, coupled with features specific to energetic environments, allows facilities to realize the benefits of RAM technology in a more efficient, safe, and productive manner.”

Designed around Dynamic Energetic Requirement

The LabRAM II H is designed to respond robustly to energetic users’ dynamic requirements. LabRAM II H’s new features are numerous, with double the capacity of previous LabRAM models. Now up to 2.2 pounds, LabRAM II H provides manual or automatic/programmable vacuum operation, onboard machine cooling capability, redundant grounding of all components, temperature monitoring, and control and data collection of the mixing vessel contents. In addition, every LabRAM II H system is provided with a laptop based Human Machine Interface (HMI) that provides for remote operation from up to 2.5 miles. Customers requiring Class I Div 1 and Class II Div 1 will find the LabRAM II H meets the specifications for hazardous environments.

Integrated Component Design

The fully integrated LabRAM II H houses all electronic, power and control hardware onboard, eliminating the need for a separate control component. The unit is operable with or without the optional acoustic housing, and all enclosure and housing materials are stainless steel.

Learn more about the LabRAM II H here.

The post LabRAM II H Released for Hazardous Environments appeared first on Resodyn Acoustic Mixers.

↧
↧

Second Generation LabRAM II Released

June 7, 2014, 1:21 pm
$
0
0

BUTTE, MT - Resodyn Acoustic Mixers announces the release of their new developmental mixer, the LabRAM II. This second generation of ResonantAcoustic® Mixing (RAM) technology introduces significant benefits for mixing and processing a broad variety of applications in commercial industries from advanced materials to cosmetics.

RAM customers have come to rely on the core RAM technology for high quality and low cost mixing of liquids, solids and gases. The technology allows users to employ intense, low-frequency acoustic mixing at up to 100g’s of acceleration without the inherent issues associated with the use of conventional mixing technologies.

“LabRAM II fundamentally changes the basic principles of processing and mixing,” according to Resodyn President and CEO, Lawrence Farrar. “Speed and quality are key in today’s demanding material applications, and LabRAM II delivers both at twice the capacity of the first generation of LabRAM. The innovative performance and integrated features open many more facilities to the benefits of RAM technology in a more efficient, safe, and productive manner.”

Designed around Dynamic Processing Requirements
The LabRAM II is designed to respond robustly to users’ dynamic requirements. LabRAM II’s new features are numerous, with double the capacity of previous LabRAM models. Now up to 2.2 pounds per mix capacity, LabRAM II provides manual or automatic/programmable vacuum operation, vessel cooling capability, temperature monitoring, control and data collection of the mixing vessel contents, and integrated RAMware2 operating system.

Integrated Component Design
The fully integrated LabRAM II houses all electronic, power and control hardware onboard, eliminating the need for a separate control component. The LabRAM II acoustic housing features strobe lighting to facilitate observation and inspection of the mixing phases and progress.

Learn more here.

The post Second Generation LabRAM II Released appeared first on Resodyn Acoustic Mixers.

↧

Green Processing of Energetic Materials Using RAM Technology

March 16, 2016, 1:35 pm
$
0
0

SERDP/ESTCP has been utilizing RAM Technology for several projects.

This particular project will demonstrate the ability of the new Resonant Acoustic® Mixing (RAM) technology to produce energetic weapons systems components in a single processing step and quantify the reduction in processing waste generated as compared to legacy manufacturing techniques.

For more information on the project, visit
https://serdp-estcp.org/Program-Areas/Weapons-Systems-and-Platforms/Energetic-Materials-and-Munitions/Explosives/WP-201507/WP-201507/(language)/eng-US

The post Green Processing of Energetic Materials Using RAM Technology appeared first on Resodyn Acoustic Mixers.

↧

OmniRAM Acoustic Mixer Introduced

August 23, 2017, 1:57 pm
$
0
0

BUTTE, MT - Resodyn Acoustic Mixers announces the release of the OmniRAM™, a pilot and production scale acoustic mixer. This new addition to the ResonantAcoustic® Mixing (RAM) product line is designed to provide world-class RAM mixing performance while bridging the gap between Resodyn’s LabRAM II – 1 kg capacity system and the RAM 5 – 36 kg system. OmniRAM can process materials faster, better, more efficiently, and more productively with a payload capacity of up to 5 kg (11 lb).

Customers trust the core RAM technology for mixing of powders, liquids, gases, and viscous materials at higher quality and lower cost than many traditional mixing technologies. ResonantAcoustic® Mixing is a non-contact mixing system that employs low-frequency acoustic mixing at intensities up to 100g’s of acceleration without the inherent issues associated with the use of conventional, contact-based mixing technologies.

The New OmniRAM™ Features Include:

  • Increased Capacity: Maximum payload capacity of 5 kilograms (11 lb) provides the flexibility to process at a test or pilot scale, as well as production levels.
  • Mixer Versatility: RAM’s universal vessel holder allows for multiple mixing vessel types. Vacuum and jacketed accessories are also available to increase processing capabilities, eliminating cross-contamination and clean-up while processing virtually any type of material.
  • Increased Security Features: RAM on-board operating system provides machine operations control, recipe development and storage, as well as multiple level, digital security and access control from operator to supervisor.

Processing Accessories/Upgrades:

  • Vacuum System: Separate Manual or OmniRAM™-Controlled Automatic Vacuum Systems provide degassing and improved processing functions
  • Jacketed Vessel: Allows for mixing vessel temperatures from 302oF / 150oC to 34oF/1.1oC
  • Temperature Monitoring: On-board tracking of internal temperature of mixing vessel
  • Continuous Processing: Innovative Continuous Acoustic Mixing (CAM) feature breaks through the batch-based throughput barrier with non-stop powder and solids processing at the highest dispersion and uniformity levels

Hazardous and Energetic Applications

OmniRAM can also be configured for optional certification in Class l Div l and Div ll, Groups C – G environments, providing a specially designed and manufactured platform for hazardous and energetic materials processing.

For more information and product specifics, please see the OmniRAM product page here.

The post OmniRAM Acoustic Mixer Introduced appeared first on Resodyn Acoustic Mixers.

↧

Resodyn Champions RAM at IPS 2018

July 17, 2018, 4:16 pm
$
0
0

FORT COLLINS, CO - Resodyn representatives Lawrence C. Farrar, President and C.E.O., and Mike Miller, Senior Chemical Engineer, joined experts and developers at the 43rd International Pyrotechnics Seminar in Fort Collins, Colorado from July 8-13, 2018. The Seminar explored technology and applications issues relating to energetic and pyrotechnic technology.

For more information call 406-497-5333 or email us at info@resodynmixers.com

The post Resodyn Champions RAM at IPS 2018 appeared first on Resodyn Acoustic Mixers.

↧
↧

Resodyn Technical InterChange 2018 Draws Diverse International Crowd

October 8, 2018, 7:57 am
$
0
0

BUTTE, MT - Resodyn Acoustic Mixers hosted attendees at Technical InterChange 2018 (TI-18) for a first-hand preview of the newly released  LabRAM I this week at Resodyn Acoustic Mixers’ headquarters in Butte, Montana. The more than 60 attendees from nine countries represent a broad range of technical knowledge and process applications and requirements in industries such as energetics, advanced materials, and pharmaceuticals.

“Our eighth iteration of TI featured a shift in focus toward the specific customer-based applications, issues, and challenges faced by our customers world-wide. The enthusiastic response of our attendees indicates a new and rich direction for future Technical InterChanges,” said Resodyn President and Founder Larry Farrar.

The world-class TI event is designed for discovery, practice, and hands-on operation of all RAM technologies, products, and developments. The three-day InterChange featured live RAM mixing  demonstrations and solutions, dozens of technical presentations by Resodyn engineers and experienced RAM users, an open poster technology/user experience session, and a supplemental session for training and certification using Resodyn’s larger scale RAM 5.

The post Resodyn Technical InterChange 2018 Draws Diverse International Crowd appeared first on Resodyn Acoustic Mixers.

↧

LabRAM I ResonantAcoustic® Mixer Announced, Shipments Begin in 2019

October 8, 2018, 11:47 am
$
0
0

BUTTE, MT - Resodyn Acoustic Mixers announced the newest member of their LabRAM family of ResonantAcoustic® Mixers (RAM), at the company’s Eighth Annual Technical InterChange (TI-18) conference in Butte, Montana. The new LabRAM I features up to 100 g of acceleration at 60 Hz for fast, effective, and repeatable processing with a capacity of up to 1.1 lbs. (500 grams), designed for bench-scale development and testing. In addition to a power increase of up to 10X over the original LabRAM, the LabRAM I features new, robust on-board digital control of machine operations and optional features like vacuum mixing functions and temperature monitoring, all with a maximum noise level of 70 db.

The LabRAM I will be available for sale Q1 2019 and will begin shipping to customers later in the year. Full features and specifications of the LabRAM I can be found here.

Please contact us with any additional questions.

The post LabRAM I ResonantAcoustic<sup>®</sup> Mixer Announced, Shipments Begin in 2019 appeared first on Resodyn Acoustic Mixers.

↧
Search

Development Group Spotlights Resodyn

December 18, 2018, 10:00 am
↧

Technical InterChange 2019 Dates Announced!

January 10, 2019, 1:30 pm
$
0
0

SAVE THE DATE!

SEPTEMBER
10-12, 2019

Welcome Reception
on the Evening of September 9

Butte,
Montana, USA

Hosted at Resodyn Headquarters,
Manufacturing Facility, and Surrounding Venues

The 9th Annual Resodyn Acoustic Mixers Technical InterChange 2019 is a can't-miss event for current RAM users and new customers alike. Featuring:

Cutting Edge
Technical Presentations
TI-18 EB Presentation 800px
RAM Processing
Demonstrations
TI-18 RAM 5 CAM 800px
Open Poster
Session
TI-18 Poster Session 800px
RAM 5 Training
(September 13)
TI-18 RAM 5 800px

"The depth of knowledge and sharing of information was astounding, well worth my time and money."

- Technical InterChange 2018 Attendee

Questions?

Official registration forms, specifics on venues and agenda, and call for poster and presentation abstracts are forthcoming. Please sign up for updates.
Get Updates

The post Technical InterChange 2019 Dates Announced! appeared first on Resodyn Acoustic Mixers.

↧
↧

The New Resodyn Acoustic Mixers Website

January 16, 2019, 10:00 am
$
0
0

BUTTE, MT – Resodyn Acoustic Mixers, Inc. announces the launch of a new, resource-rich ResodynMixers.com website. The site is designed to offer customers fast access and insight into how ResonantAcoustic® Mixing (RAM) can benefit them. ResodynMixers.com reveals the breadth of applications and industries already leveraging the company’s technology. The site offers a rich depth of documentation and technical data and provides a platform for additional content as it is produced.

ResonantAcoustic® Mixing is a 21st Century mixing technology, delivering new capabilities and unprecedented speed and quality across a wide range of processing applications. RAM extends robust, enabling features from laboratory bench scale development devices to continuous production systems at an industrial scale.

Acoustic Mixing is powerful, versatile, and easy to use. At the same time, its effectiveness is non-intuitive without seeing it in action. Our new website actively shows visitors what RAM technology can do with more high-speed, inline video, and a growing library of downloadable technical content that highlights how RAM users are already benefiting today.

- Larry Farrar, Resodyn Acoustic Mixers President and CEO,

ResodynMixers.com also delivers quick access to on-site demonstration scheduling, trial rental programs, and complimentary mixing tests.

Questions and feedback about the new site are welcome and can be sent to webmaster@resodyn,com.

 

The post The New Resodyn Acoustic Mixers Website appeared first on Resodyn Acoustic Mixers.

↧

4th Annual RAM Energetic Users Forum

February 21, 2019, 8:59 am
$
0
0

Dr. Eric Beckel delivers a RAM presentation

The ResonantAcoustic® Mixing (RAM) Energetic Users' Forum allows attendees to share and review new RAM applications, techniques, safety, and performance data within the energetic community. The select audience, numbering over 50 in 2019, includes energetic material experts such as event organizers Dr. Eric Beckel of ARDEC Picatinny Arsenal and Dr. Andrew Nelson of NAVAIR China Lake, as well as new RAM users.

RAM technology, invented by Resodyn Acoustic Mixers under an SBIR grant, has become the propellant, explosive, and flare processing technology of choice for many dovernment facilities, commercial entities, and allies around the globe.

The 4th annual Forum was held February 20-21, 2019 at Redstone Arsenal in Hunstsville, Alabama.

Missed this year's RAM Energetic Users Forum?

Learn more about how RAM delivers results in energetics material processing.
Click Here

The post 4th Annual RAM Energetic Users Forum appeared first on Resodyn Acoustic Mixers.

↧

RAM Featured in Explosives Engineering Journal

March 27, 2019, 7:08 am
$
0
0

ResonantAcoustic® Mixing (RAM) is highlighted as a key technology component in the future of energetic material production in an article entitled Advanced manufacturing of energetics: previous experiences and new opportunities in the 2019 Journal of the Institute of Explosives Engineering.

The article explores challenges and dangers associated with traditional methods of energetics manufacture, and how the latest technologies promise to make big improvements.

RAM’s speed, safety, and mix quality are discussed as primary advantages over traditional processing methods. Resodyn’s Continuous Acoustic Mixing (CAM) and Continuous Acoustic Reactor (CAR) technologies are also highlighted, promising to further revolutionize energetics production. The article concludes that RAM, 3D Printing, and Flow Reaction/Chemistry have combined potential to make “the energetics factory of the future” more efficient, more versatile, and safer.

The article's author, Jim Fleming has more than 35 years’ experience with energetic materials and systems at organizations including the UK Ministry of Defense and Roxel (UK Rocket Motors) Limited. His career has included energetics facility Process Safety and New Product Development, spanning many roles from operations to business development, and recently included a position on Roxel UK’s Senior Management Team.

Fleming has a BSc in Chemical Engineering and an MSc in Engineering Business Management. He is a Chartered Engineer. Today, he provides independent consultancy as Director of FCIT2 Limited.

The journal is available to members of the Institute of Explosives Engineering on their website.

The post RAM Featured in Explosives Engineering Journal appeared first on Resodyn Acoustic Mixers.

↧
Viewing all 122 articles
Browse latest View live
Search